Exit Inspection-HPH Window Insulation: General Checklist

ENERGY STAR® Checklist

WINDOW and INSULATION - GENERAL

Project

Builder

Inspection date

ENERGY STAR® Windows

Windows are ENERGY STAR® rated and meet the ENERGY STAR® program requirements for windows, doors, and skylights.

Yes/Pass/True No/Fail/False NA See Note

Windows meet or exceed the U-factor and solar heat gain coefficients (SHGC) specified in the 2009 International Energy Conservation Code.

Yes/Pass/True No/Fail/False NA See Note

IECC Residential Energy Efficiency

ENERGY STAR® rating certification stickers are available on windows, doors, and skylights and/or are available in the Buyer package.

Yes/Pass/True No/Fail/False NA See Note

Resource Guide

Insulation - ENERGY STAR® Requirements

Insulation meets or exceeds levels specified in Item 3.1 of the Rater Design Review Checklist

Yes/Pass/True No/Fail/False NA See Note

Rater Design Checklist

All Insulation Achieves RESNET-defined Grade-1 Installation

RESNET Grade 1 Resource Guide

Insulation is installed without misalignments, compressions, gaps, or voids along the thermal envelope of the house.

Yes/Pass/True No/Fail/False NA See Note

Insulation is cut to fit around wiring so that insulation can completely fill the wall cavity

Yes/Pass/True No/Fail/False NA See Note

Insulation is in substantial and permanent contact with the primary air barrier

Yes/Pass/True No/Fail/False NA See Note

There are no air spaces between different insulation types or systems. (Exception: Reflective air space in accordance with ASHRAE Handbook or ASTM C1224)

Yes/Pass/True No/Fail/False NA See Note

Insulation has been installed to the required density and thickness necessary to achieve the required R-value

Yes/Pass/True No/Fail/False NA See Note

The insulation is snug around obstructions including framing, blocking, wiring, pipes, etc. without substantial gaps or voids.

Yes/Pass/True No/Fail/False NA See Note

Send to

Builder representative

Builder email

Copy to

Subcontractor

Subcontractor representative

Subcontractor email

When the “Send Inspection Report” button is selected, an email with all the information in this Inspection Report will be sent to the “Builder email” address of the Company Representative completing this report and to the “Subcontractor email” address and “Copy to” addresses if provided.

ENERGY STAR® Checklist

WINDOW and INSULATION - GENERAL

IECC Climate Zones

IECC Residential Energy Efficiency

Rating Stickers

►EnergyStar Windows 1

►EnergyStar Windows 2

Resource Guide

Insulation Envelope

Acceptable Insulation

►Install batts 1

►Install batts 2

►Install batts 3

Rater Design Checklist

►RESNET Grade 1 - 1

►RESNET Grade 1 - 2

RESNET Grade 1 Resource Guide

Company